You just clicked a link to go to another website. If you continue, you may go to a site run by someone else.
We do not review or control the content on non-Medtronic sites, and we are not responsible for any business dealings or transactions you have there. Your use of the other site is subject to the terms of use and privacy statement on that site.
It is possible that some of the products on the other site are not approved in your region or country.
Your browser is out of date
With an updated browser, you will have a better Medtronic website experience. Update my browser now.
The content of this website is exclusively reserved for Healthcare Professionals in countries with applicable health authority product registrations, except those practicing in France as some of the content is not in compliance with the French Advertising law N°2011-2012 dated 29th December 2011, article 34.
Click “OK” to confirm you are a Healthcare Professional.
Medtronic rotatable connector 5944RL provides continuous signal monitoring for SelectSecure™ MRI SureScan™ Model 3830 procedures.
The Medtronic rotatable connector 5944RL is a single-use specialty tool designed to drive procedural efficiencies and guide implant success during Medtronic CSP procedures.
Compatible with the SelectSecure™ MRI SureScan™ Model 3830 lead, the first and only lead CE approved for His bundle pacing and left bundle branch area pacing.
Intended to guide implant success and drive procedure efficiencies with a single point of connection:
The rotatable connector is intended to be used with the following Medtronic products:
This device consists of a pair of connection cables, which includes:
Physical characteristics | Value |
Length | 3.66 m |
Pacing lead connector compatibility | IS-1, DF-4, IS-4 |
Connection mode | Unipolar, bipolar |
Instrument end connector | 2 mm shroud pins (exposed adaptors provided) |
Patient end connector | Rotatable connector (cathode) and alligator clip (anode) |
Rotatable connector weight | 4.5 ± 0.1 g |
Electrical characteristics | Value |
Cathode cable resistance | 0.74 ± 0.14 Ω |
Anode cable resistance | 0.71 ± 0.05 Ω |
The 5944RL rotatable connector provides a single connection and enables continuous signal monitoring (including EGMs, impedance, COI/Current of Injury), continuous lead deployment and an overall streamlined procedure.
The core performances (mechanical integrity, static impedance and insulation) of 5944RL were tested and proved to be equivalent to the legacy. The unique features of 5944RL (rotational impedance and signal quality under rotation) were also evaluated and proved to meet the clinical use needs.
5944RL is only adaptive to Medtronic pacing leads. The rotatable connector is designed to be compatible with the IS-1, IS-4, and DF-4 leads. It can be connected to the Medtronic pacing leads with the connectors mentioned above.
5944RL does not affect the signal transmission quality. Compared with the impedance of pacing lead and patient, both the static and rotational electrical resistance of 5944RL is very low. Signal transmission through 5944RL is stable and continuous.
Yes. 5944RL could be used in temporary pacing. Please note that patient cable may be needed in some use conditions as 5944RL has shrouded pins at instrument end.
5944RL rotatable connector is not able to be re-used or re-sterilized.
The 5944RL rotatable connector has a design that is comprised of components that are neither designed nor tested for reuse. Additionally, products may fail to withstand the harsh conditions encountered during resterilization.
5944RL has two 2 mm shrouded pins at the instrument end for connection. They should be directly inserted into the 2 mm receptacles. When connecting, ensure the color of the pin and receptacle are the same.
The yellow adapter is used to convert the shrouded pin to an exposed pin. If the receptacles are not applicable for shrouded pins, please use the yellow adapter for the connection. Note that the adapters should be fixed firmly to the device receptacles to prevent potential electrical shock risk due to accidental detachment.
For the shroud pins at the instrument end, they should be inserted fully and firmly into the receptacles of devices. For the rotatable connector, the pin connector of the pacing lead shall be inserted fully into the central receptacle. The alligator clip should be opened up and firmly attached to the ring of the pacing lead.
The cable length is 3.66m. Please ensure that the cable length is adequate for the distance between the pacing lead and the devices.
Please rotate the pacing leads, which will drive the cap to rotate together, the body is not designed to rotate.
Step 1. Check and adjust the connection of the leads/monitoring instrument ends with the device.
Step 2. If the signal is still not stable after Step 1, please replace with a new product.
No. The rotatable connector weight and connection force have been fully considered and tested to guarantee the connection during normal rotation.
No. The effect of liquid such as patient blood and saline on the signal quality has been evaluated. The results prove that the signal quality was not affected.
The design verification proves the rotatable connector can work normally within five times of insertion and extraction.
No. The engineering test proves the rotatable connector will not damage the pacing lead pin under normal use conditions.
Item number | Value |
5944RL | Medtronic rotatable connector — for use with cardiovascular stimulating instruments, IS-1 leads, and IS-4/DF-4 lead |
SelectSecure™ 3830 Left bundle branch area pacing safety and efficacy utilizing RWE. Medtronic data on file.
Riley WF, Zachary LW. Introduction to Mechanics of Materials. Hoboken, NJ: Wiley; 1989.
Zou J, Chen K, Liu X, et al. Clinical use conditions of lead deployment and simulated lead fracture rate in left bundle branch area pacing. J Cardiovasc Electrophysiol. 2023;34(3):718–725. doi: 10.1111/jce.15843.