Enteer Re-entry System
You just clicked a link to go to another website. If you continue, you may go to a site run by someone else.
It is possible that some of the products on the other site are not approved in your region or country.
Your browser is out of date
With an updated browser, you will have a better Medtronic website experience. Update my browser now.
The content of this website is exclusively reserved for Healthcare Professionals in countries with applicable health authority product registrations, except those practicing in France as some of the content is not in compliance with the French Advertising law N°2011-2012 dated 29th December 2011, article 34.
Click “OK” to confirm you are a Healthcare Professional.
Target a vessel's true lumen from the subintimal space by using the Enteer™ re-entry catheter to cross chronic total occlusions (CTOs). Leverage the self-orienting balloon that, when combined with an Enteer™ guidewire, enables re-entry. With two balloon sizes and three guidewire options, the Enteer™ re-entry system can be used to access and cross lesions above or below the knee, without any capital equipment investment.
The Enteer™ Re-entry Guidewire is intended to facilitate placement of balloon dilatation catheters or other intravascular devices during percutaneous transluminal angioplasty (PTA). The
The Enteer™ Re-entry Catheter is indicated for directing, steering, controlling and supporting a guidewire in order to access discrete regions of the peripheral vasculature.
Design of Enteer™ re-entry system
180° and offset exit ports on each side of
Instructions for Use
Find this technical manual in the product labeling supplied with each device.
|Reference Number||Balloon Size
(W × H × L mm)
|ENB-375-20-135||ATK||3.75 × 1.5 × 20||135||≤ 0.018||0.066||5 F|
|ENB-275-20-150||BTK||2.75 × 1.0 × 20||150||≤ 0.018||0.066||5 F|
See product catalog for complete, detailed product information.